Description

Feuling 1207

FEULING HIGH LOAD BEEHIVE valve springs are a direct bolt in replacement, no spring seat or rocker cover machining required up to 0.565 lift. These springs will accommodate over 0.600 cam lift but may require spring seat pocket machining on the cylinder heads to set correct spring open height. Milwaukee Eight HIGH LOAD springs are machined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal heat treat and super NexTex finish to give these valve springs the needed fatigue life to exceed the high demands of V-Twin engines from stock to performance.

ONLY recommended for 0.540+ lift camshafts and RACE style engines as these valvesprings if not set properly will create extreme rocker arm deflection – See Feuling 592 grind cam #1348 or 618 grind cam #1352.

FEULING BEEHIVE valve spring kits are each hand measured and labeled specifically based on their coil bind / required open height. Our kits require you to measure installed height and may require use of included shims.
This is so you can set up the springs specifically to your camshaft lift for quieter and smoother performance. Similar to tuning your suspension to your weight and riding style.

FEULING BEEHIVE valve springs use a smaller lighter weight retainer which drastically reduces the valve weight creating a quicker revving and smoother motion than comparable dual or single valve springs.
Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics!
HIGH LOAD SERIES springs available for 6mm valves

Kits include: matched set of FEULING HIGH LOAD BEEHIVE valve springs, Ti retainers, machined spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with a spring loaded valve stem wiper system.

Dont get stung by inferior valve springs!
Quicker Revving – Smoother Motion – Light Weight Ti Retainers

MILWAUKEE EIGHT

SEAT Lbs. / INSTALLED HEIGHT
151 Lbs. @ 1.475 (0.485 Lift)
144 Lbs. @ 1.498 (0.508 Lift)
143 Lbs. @ 1.501 (0.511 Lift)
140 Lbs. @ 1.511 (0.521 Lift)
124 Lbs. @ 1.562 (0.578 Lift)
120 Lbs. @ 1.582 (0.592 Lift)
304 Lbs @ 0.990 OPEN HEIGHT
Coil Bind @ .945
*Cam specs measured on the lifter @ 0.050 lift with 1.61 rocker arm ratio

FITS:

M-Eight 17-26 with factory style 6mm valve stems & triple groove, this kit includes Ti Retainers.

COUNTRY OF ORIGIN:

USA

Disclaimer: Qualified Manufacturer Declared Replacement Part means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised.

Make	Model	Year
Harley-Davidson	CVO Electra Glide Ultra Limited FLHTKSE	2017 – 2021
Harley-Davidson	CVO Road Glide Custom FLTRXSE	2018 – 2024
Harley-Davidson	CVO Road Glide Limited	2022 – 2023
Harley-Davidson	CVO Road Glide ST FLTRXSTSE	2024
Harley-Davidson	CVO Street Glide FLHXSE	2017 – 2024
Harley-Davidson	CVO Tri Glide FLHTCUTGSE	2020
Harley-Davidson	Electra Glide Highway King FLHFB	2023
Harley-Davidson	Electra Glide Police FLHTPI	2017 – 2024
Harley-Davidson	Electra Glide Revival	2021
Harley-Davidson	Electra Glide Standard EFI FLHTI	2019 – 2022
Harley-Davidson	Electra Glide Ultra Classic EFI FLHTCUI	2017 – 2019
Harley-Davidson	Electra Glide Ultra Limited FLHTK	2017 – 2024
Harley-Davidson	Electra Glide Ultra Limited Low FLHTKL	2017 – 2019
Harley-Davidson	Freewheeler FLRT	2017 – 2020
Harley-Davidson	FXDR 114	2019 – 2020
Harley-Davidson	Hydra-Glide Revival	2024
Harley-Davidson	Road Glide Custom FLTRX	2017 – 2024
Harley-Davidson	Road Glide Limited FLTRK	2020 – 2024
Harley-Davidson	Road Glide Police FLTRXP	2024
Harley-Davidson	Road Glide Special FLTRXS	2017 – 2023
Harley-Davidson	Road Glide ST FLTRXST	2022 – 2023
Harley-Davidson	Road Glide Ultra FLTRU	2017 – 2019
Harley-Davidson	Road King EFI FLHR	2017 – 2022
Harley-Davidson	Road King Police FLHP	2017 – 2024
Harley-Davidson	Road King Special FLHRXS	2017 – 2024
Harley-Davidson	Softail Breakout 114 FXBRS	2018 – 2020
Harley-Davidson	Softail Breakout FXBR	2018 – 2024
Harley-Davidson	Softail Deluxe FLDE	2018 – 2020
Harley-Davidson	Softail Fat Bob 114 FXFBS	2018 – 2023
Harley-Davidson	Softail Fat Bob FXFB	2018 – 2019
Harley-Davidson	Softail Fat Boy 114 FLFBS	2018 – 2024
Harley-Davidson	Softail Fat Boy FLFB	2018 – 2019
Harley-Davidson	Softail Heritage Classic 114 FLHCS	2018 – 2024
Harley-Davidson	Softail Heritage Classic FLHC	2018 – 2021
Harley-Davidson	Softail Low Rider El Diablo FXRST	2022
Harley-Davidson	Softail Low Rider FXLR	2018 – 2020
Harley-Davidson	Softail Low Rider S FXLRS	2020 – 2024
Harley-Davidson	Softail Low Rider ST FXLRST	2022 – 2024
Harley-Davidson	Softail Slim FLSL	2018 – 2021
Harley-Davidson	Softail Sport Glide FLSB	2018 – 2021
Harley-Davidson	Softail Standard FXST	2020 – 2024
Harley-Davidson	Softail Street Bob FXBB	2018 – 2024
Harley-Davidson	Street Glide EFI FLHX	2017 – 2024
Harley-Davidson	Street Glide Special FLHXS	2017 – 2023
Harley-Davidson	Street Glide ST FLHXST	2022 – 2023
Harley-Davidson	Tri Glide Ultra Classic FLHTCUTG	2017 – 2020

FITMENT DISCLAIMER

Fitment information is provided as a general reference only and is not guaranteed for any motorcycle, whether stock or modified. Compatibility may vary by year, model, and individual configuration.

Customers are responsible for verifying fitment prior to purchase. House of Harley-Davidson assumes no liability for purchases made based on incorrect or unverified fitment information.

Please contact our Parts Department with any questions before ordering at 414-282-2211