Description

Pushrods/Tube Kit – Quick Install – Twin Cam

• Tube material starts out as 7/16″ rod OD, it then gets turned down to 3/8″ OD leaving heavy duty 7/16″ – 20 threads for the base and jam nut
• The jam nut slides up the pushrod, the base then loosens up into the pushrod to allow quick install access
• 0.134″ wall thickness
• Individual length exhaust and intake pushrods
• Install without the removal of rocker covers
• Includes four chrome lower tubes and clips to be used in conjunction with factory inner tubes, covers, caps springs and washers
• Made in the USA

Notes

• Correct pushrod/lifter adjustment requires starting with fully pumped up lifters.
• Quick-install pushrods have a 7/16″-20 threads per inch. 0.050″ adjustment per turn. Two turns = 0.100″